Umbilical winch with slipring
Electrical driven winch
Electrical driven winch
Electrical driven winch made for handling FNC cable and high-pressure water hose with slipring for fiber and power. The unit has protecting fences and pad eyes for lifting
Frame dimensions LWH | 130 x 133 x 133 cm. |
---|---|
Frame | Anodized AL6082-T6. |
Umbilical capacity, Cable and water hose | 120 meters, approximately (max 100m with standard tether). |
Weight in air / Weight with 100 meter cable and 1 inch hose | 435 kg. ~590 kg. |
Pulling force, inner layer | >2000 N. |
Power input | Single phase 230 V AC 50 Hz. 10A Supplied with 10 m cable. |
Cable speed | 0-25 meter per minute (inner layer). |
Interface water swivel | 5/4 inch, female BSP. Customer supplied hose from winch to pump. |
Interface fiber | Supplied with 30 m armoured fiber with IP65 connector on winch side and ST connector on control side. |
Interface power | 63A 230V Power Inlet type 363- 9. |
Maximum water pressure for swivel | 350 bar. |
Option: Protecting fences | Protecting fences made from polycarbonate |